Hybrid-Attribute; Interface - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example

hybrid-attribute

Use this command to configure optical and electrical attributes of
the gigabit Ethernet port.
Interface configuration
hybrid-attribute {fiber|copper}
fiber
copper
It is optical interface attribute by default.
Set the optical/electrical attribute of the gigabit Ethernet port to
optical interface attribute with the hybrid-attribute fiber com-
mand. Set the optical/electrical attribute of the gigabit Ether-
net port to electrical interface attribute with the hybrid-attribute
copper command.
This example describes how to set the optical/electrical attribute
of interface gei_1/1 to electrical interface attribute.
ZXR10(config)#interface gei_1/1
ZXR10(config-if)#hybrid-attribute copper

interface

The execution of this command enters the interface configuration
mode or the sub-interface configuration mode. For an inexistent
sub-interface, create a sub-interface and enter the sub-interface
configuration mode. To delete the corresponding interface and re-
lated configurations, use the no form of this command.
Global configuration
interface {<interface-name>| byname <byname>}
no interface {<interface-name>|<byname>}
<interface-name>
byname <byname>
� The no form of this command is invalid for physical interfaces.
Both commands - no interface byname <byname> and no
interface <interface-name> can delete the interface.
� To enter the configuration mode of the interface with parameter
byname, set the interface alias first.
� This example describes how to enter interface 1 of network
board fei_1.
ZXR10(config)#interface fei_1/1
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Interface Configuration
Configures the attribute to optical interface
attribute
Configures the attribute to electrical interface
attribute
Interface name
Interface alias
29