NEC ASPILA EX Feature Manual page 136

Central Office Calls, Placing
Operation
122 Features
In order to mute the handset transmitter, set up a Microphone Cutoff Programmable Function Key.
The MIC key will only mute the handsfree microphone.
Programmable Function Keys
Line keys and loop keys simplify placing outside calls.
Trunk Group Routing
Trunk Group Routing sets outbound call routing options for users that dial the Trunk Group
Routing code (9) for trunk calls.
Trunk Groups
Use trunk group programming to set the order in which users access trunks within a specific
trunk group.
To place a call over a trunk group:
1. At system phone, press idle CALL key.
OR
At single line set, lift handset.
2. Dial 804.
3. Dial line group number (1-9 or 001-100 ).
4. Dial number.
OR
1. At system phone, press trunk group key (PGM 15-07 or SC 851: *02 + group).
Also see the "Loop Keys" feature.
2. Dial number.
To place a call using Trunk Group Routing:
1. At system phone, press idle CALL key.
OR
At single line set, lift handset.
2. Dial 9.
If your system has an Alternate Trunk Route Access code, you may dial that instead.
3. Dial number.
OR
1. At system phone, press Trunk Group Routing key (PGM 15-07 or SC 852: *05).
Also see the "Loop Keys" feature.
2. Dial number.
Aspila EX Software Manual