Did Intercept Ring Group - NEC ASPILA EX Feature Manual

22-12 : DID Intercept Ring Group

Level:
IN
Description
Input Data
Conditions
Feature Cross Reference
Aspila EX Software Manual
• Available.
For each DID Translation Table, use Program 22-12 : DID Intercept Ring Group to define the
first destination group for DID calls.
Depending on the entry in Program 22-09 and 22-11, the incoming calls will route to the first desti-
nation group by the following:
• Vacant number intercept (vacant number means that there is no phone connected, no station
card installed, or the extension number is not defined in Program 11-02)
• Busy intercept
• Ring-no-answer intercept
If the destination is '0', the calls will be forwarded to the trunk ring group defined in Program 22-11
based on the table assigned to the DID trunk.
Note: If Program 22-09-05 and 22-09-06 are set, the priority of transferring will be in this order:
Program 22-09-05
Conversion Table Area Number
Day/Night Mode
1-8
None
• Direct Inward Dialing (DID)
Program 22 : Incoming Call Setup
22-12 : DID Intercept Ring Group
Aspila EX
+ +
Program 22-09-06 Program 22-12
Incoming Group Number
0 (no setting)
1-100 (incoming group)
101 (DSPDB voice mail)
102 (In-Skin voice mail)
01-20
Default
1
Programming 709