Analogue Trunk Data Setup - NEC ASPILA EX Feature Manual

14-02 : Analogue Trunk Data Setup

Level:
IN
Description
Input Data
Item
No.
01 Signaling Type (DP/DTMF)
This option sets the signaling type for the trunk.
02 Ring Detect Type
This option sets Extended Ring Detect or Immediate
Ring Defect for the trunk.
03 Flash Types
This option to select the flash type (open loop flash
or ground). Always set this option for open loop
flash.
04 Flash For Timed Flash or Disconnect
This option lets you use Flash for Timed Flash (Pro-
gram 81-01-14) or Disconnect (Program 81-01-15).
(A user implements Flash by pressing the FLASH
key while on a trunk call.)
05 Dial Tone Detection for Directly Accessed
Trunks
Use this option enable/disable dial tone detection
for directly accessed trunks. If disabled, the system
outdials on the trunks without monitoring for dial
tone.
06 Pause at 1st digit after line seize in manual dial
mode
Aspila EX Software Manual
• Available.
Use Program 14-02 : Analogue Trunk Data Setup to set the basic options for each analogue
trunk port. Refer to the chart below for a description of each option, its range and default setting.
Trunk port number
Item
Program 14 : Trunk Basic Setup
14-02 : Analogue Trunk Data Setup
Aspila EX
Input Data
0- Dial Pulse (10 PPS)
1- Dial Pulse (20 PPS)
2- DTMF
0- Normal/delayed
1- Immediately ringing
0- Open Loop Flash
1- Ground
0- Timed flash
1- Disconnect
0- DTD not used
1- DTD used
0- No Pause
1- Pause
1-200
Related
Default
Program
2
0
0
0 81-01-14
81-01-15
1 21-01-04
1 21-01-06
Programming 543