NEC ASPILA EX Feature Manual page 404

390 Features
To record, listen to or erase a VRS message if you call in using DISA:
1. Place call to the system.
2. After the system answers, dial the DISA password (normally 000000).
3. Dial 716 and the VRS password.
4. Dial the function you want.
7 = Record
5 = Listen
3 = Erase
5. Dial the message number (01-48), record the message and press # to end recording.
If you dialed 7 to record, you can dial # to listen to the message you just recorded.
If you dialed 5 to listen, you can dial 5 and the message number to hear it again or if
you want to Record, listen to or erase another message, go back to step 4.
GENERAL MESSAGE
To listen to the General Message:
System Phone Only
Your MW LED flashes when there is a new General Message. A voice message period-
ically reminds you.
1. Do not lift the handset or press CALL.
2. Dial 4 (General).
OR
1. At lift the handset and dial 711.
You will hear the General Message.
Normally, your MW LED goes out. If it continues to flash, you have unanswered
"Message Waiting" requests or new messages in your "Voice Mail" mailbox.
To record, listen to or erase the General Message:
1. Press idle CALL key.
OR
At single line telephone, lift handset.
2. Dial 712.
3. Dial the function you want.
7 = Record
5 = Listen
3 = Erase
If you dialed 7 to record, press # to end the recording.
If you dialed 5 to listen, you can dial 5 to listen to the message again.
To Record the General Message again, go back to step 1.
If you dialed 3 to erase the General Message, you must go to step 4 (hang up). To
cancel without erasing on a system phone, press HOLD instead and go back to step 1.
4. Hang up when you are done.
Voice Response System (VRS)
Aspila EX Software Manual