NEC ASPILA EX Feature Manual page 112

Call Forwarding to Abbreviated Dial
Default Setting
Related Features
Programming
98 Features
Disabled.
Call Forwarding, Fixed
Fixed Call Forwarding can automatically forward an extensions calls to an outside number.
Call Forward, Off Premise
Call forward codes can be used to forward to a specific outside number.
Door Box
Door Boxes must be programmed in order for the calls to be transferred off-premise.
Toll Restriction
The outside number Call Forwarding dials can only be a number normally allowed by the for-
warded extension's Toll Restriction.
Voice Response System (VRS)
In systems with a DSP daughter board for VRS, callers to an extension forwarded off-premise
hear, "Please hold on, your call is being rerouted."
• 11-10-04 : Service Code Setup (for System Administrator) - Storing Common Abbrevi-
ated Dialing Numbers
Assign the service code to be used for Common Abbreviated Dialing (853 by default).
• 11-10-18 : Service Code Setup (for System Administrator) - Off-Premise Call Forward
by Door Box
Assign the service code to be used for Off-Premise Calling Forwarding by a Door Box (822
by default).
• 14-01-13 : Basic Trunk Data Setup - Loop Supervision
Enable (1) loop supervision for each trunk that should be able to use Call Forwarding Off-
Premise.
• 15-07-01 : Programmable Function Keys
For one-touch access to the Call Forwarding setup codes (843, 845, 848), assign a function
key for Call Forwarding.
For Off-Premise Call Forwarding by a Door Box, assign a function key (54) if required.
• 20-06-01 : Class of Service for Extensions
Assign Class of Service (1-15) to an extension.
• 20-11-12 : Class of Service Options (Hold/Transfer Service) - Call Forwarding Off-
Premise
In an extensions Class of Service, enable (1) or disable (0) setting up Call Forwarding Off-
Premise at the extension.
• 32-01-03 : Door Box Timers - Off-Premise Call Forward by Door Box Disconnect Timer
Define the conversation period for an Off-Premise Call Forward by Door Box call. When this
timer expires, the caller will hear busy tone for 3 seconds (fixed timer) and the call will then
be disconnected (0-64800).
Aspila EX Software Manual