Warning Tone For Long Conversation - NEC ASPILA EX Feature Manual

Hide thumbs Also See for ASPILA EX:

Table of Contents

Warning Tone For Long Conversation

Default Setting

The system can broadcast warning tones to a trunk caller warning them that they have been on the

call too long. The tones are just a reminder -- the user can disregard the tones and continue talking

if they choose. The outside caller does not hear the warning tones. In addition, warning tones do

not occur for Intercom calls and most incoming trunk calls. DISA trunks can also have warning

tones. Warning tones are not available to analogue single line telephone (SLT) users.

There are two types of warning tones: Alarm Tone 1 and Alarm Tone 2. Alarm Tone 1 is the first

set of tones that occur after the user initially places a trunk call. Alarm Tone 2 broadcasts periodi-

cally after Alarm Tone 1 as a continued reminder. Each alarm tone consists of three short beeps.

Warning Tone for DISA Callers

For DISA callers, with this feature enabled, the warning tone timer begins when an incoming DISA

call places an outgoing call and either the inter-digit timer expires or the outgoing call is answered.

With this feature enabled, the warning tone timer begins when an incoming DISA call places an

outgoing call and either the inter-digit timer expires or the outgoing call is answered.

If an outside call is transferred to forwarded off-premise using an outside trunk, the warning tone

timer begins immediately. This will occur only if either trunk involved in the call is programmed

for this feature (Program 14-01-17). When transferring a trunk call off-premise, Program 14-01-13

must be enabled (set to '1').

Warning Tone For Long Conversation

Aspila EX Software Manual

Show Quick Links

Table of Contents