Trunk Group Routing - NEC ASPILA EX Feature Manual

Trunk Group Routing

• Available- 100 trunk groups and 100 routes.
Description
Conditions
Default Setting
Programming
362 Features
Trunk Group Routing sets outbound call routing options for users that dial the Trunk Group Rout-
ing code (9) for trunk calls. Trunk Group Routing routes calls in the order specified by system pro-
gramming. If a user dials 9 and all trunks in the first group are busy, the system may route the call
to another group.
None
Enabled. All trunks are in Group 1.
•11-01-01 : System Numbering
Set up a Service Code for Alternate Trunk Route Access.
•11-09-01 : Trunk Access Code
If required, change the single-digit Trunk Access Code (normally 9). If you change this code,
you must also review the settings in 11-01 for the new code selected.
•11-09-02 : Trunk Access Code - Alternate Trunk Route Access Code
Assign the Service Code set up in 11-01 for Alternate Trunk Route Access.
•14-05-01 : Trunk Groups
Assign trunks to trunk groups (1-100).
Aspila EX
Trunk Group Routing
Aspila EX Software Manual