NEC ASPILA EX Feature Manual page 711

Telephone Programming Instructions
Aspila EX Software Manual
• Direct Inward Dialing (DID)
To enter data for Program 22-10 (DID Translation Trable Setup):
1. Enter the programming mode.
2. 22 10
22-10-01 Conv Area1
No.1_Start_Add1
­ ¯
back
3. Enter the number of the item you want to program.
22-10-nn Conv Areann
nnnnn
¬
4. Select the Conversion Table Area number to be programmed by pressing the FLASH or the
VOLUME p or VOLUME q keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
Program 22 : Incoming Call Setup
22-10 : DID Translation Table Setup
select
®
Programming 705