NEC ASPILA EX Feature Manual page 290

276 Features
Direct Station Selection
To program a One-Touch Key for Direct Station Selection (extension) calling:
1. Press idle CALL key and dial 855.
2. Press One-Touch Key you want to program.
3. Dial extension number you want assigned to that key.
4. Press HOLD.
5. Enter the name associated with the key you are programming.
6. Press HOLD.
7. Press SPK to hang up.
Personal Speed Dial
To program a One-Touch Key for Personal Speed Dial:
1. Press idle CALL key and dial 855.
2. Press One-Touch Key you want to program.
3. Dial general trunk access code (9).
OR
Dial Specific Trunk Service Code (805) plus the trunk number (e.g., 005).
OR
Dial Trunk Group Service Code (804) plus the trunk group number (e.g., 1).
4. Dial number you want to store.
The total of the digits stored in steps 3 and 4 cannot exceed 24. To store a Flash com-
mand, press the FLASH key.
5. Press HOLD.
6. Enter the name associated with the key you are programming.
7. Press HOLD.
8. Press SPK to hang up.
To enter a pause, press MIC.
To program a One-Touch Key for Personal Speed Dial (if your phone doesn't have
One-Touch keys):
Use this procedure for Digital Single Line (DSL) sets and analogue single line (SLT)
sets.
1. Lift handset.
2. Dial 855.
3. Dial the Personal Abbreviated Dialing bin (0-9).
Bins 1-9 correspond to One-Touch keys 1-9; bin 0 corresponds to One-Touch key 10.
4. Dial the number you want to store and press HOLD twice.
To store a Flash (with a system phone phone only), press the FLASH key.
5. (DSL or SLT) Hang up.
To dial the stored number:
1. Call (or lift handset).
One-Touch Calling
Aspila EX Software Manual