NEC ASPILA EX Feature Manual page 380

Related Features
366 Features
Abbreviated Dialing
Unless a user preselects a trunk, Trunk Group programming selects the trunk Abbreviated
Dialing users for trunk calls.
Automatic Route Selection
If a user dials a number that is not programmed in ARS, the system can route the call to a
trunk group.
Central Office Calls, Placing
Instead of using Trunk Groups, an extension user can place a trunk call by:
• Pressing a line key
• Dialing a trunk access code
• Dialing a Trunk Group Routing code (9) - refer to the Trunk Group Routing feature
Dial Tone Detection
Refer to this feature for the specifics on how the system handles Dial Tone Detection.
Direct Inward Dialing (DID)
All DID trunks of the same type should be placed in the same trunk group. These trunk groups
must then be assigned to a DID Translation Table.
Loop Keys
Program a function key as a Loop Key to allow an extension user to answer incoming trunks
within a trunk group.
Programmable Function Keys
Function keys simplify placing and answering trunk group calls.
Ring Groups
Trunks ring extensions according to Ring Group programming.
Tie Lines
To simply placing calls over your tie lines, you can put the tie lines in a trunk group.
Trunk Group Routing
Trunk Group Routing sets outbound call routing options for users that dial the Trunk Group
Routing code (9) for trunk calls.
Trunk Groups
Aspila EX Software Manual