NEC ASPILA EX Feature Manual page 351

Default Setting
Programming
Aspila EX Software Manual
Disabled.
•10-21-02 : NTCPU Hardware Setup - Baud Rate for COM Port
If the SMDR connection is made using the COM port on the NTCPU, define the baud rate
(0=4800, 1=9600, 2=19200, 3=38400).
•14-01-06 : Basic Trunk Data Setup - SMDR Print Out
For each trunk, enter 0 if trunk's calls should appear on SMDR report. Enter 1 if trunk's calls
should not appear on SMDR report.
•15-01-03 : Basic Extension Data Setup - SMDR Printout
For each extension, enter 1 if extension's calls should appear on SMDR report. Enter 0 if
extension's calls should not appear on SMDR report.
•35-01-01 : SMDR Options - Output Port Type
Specify the type of connection used for SMDR (0=No setting, 1=COM(NTCPU), 2=USB
(NTCPU), 4=CTA/CTU). The baud rate for the COM port should be set in Program 10-21-02.
•35-01-02 : SMDR Options - Output Destination Number
Specify the SMDR printer output port (CTA/CTU port number).
•35-01-04 : SMDR Options - Omit (Mask) Digits
Enter the number of digits (1-24) you want SMDR to block (i.e., "X" out). Enter 0 not to
block any digits.
•35-01-05 : SMDR Options - Minimum Number of SMDR Digits
Enter the minimum number of digits a user must dial (1-24) before the system includes a call
on the SMDR report. Enter 0 to include all outgoing calls, regardless of the number of digits
dialed.
•35-01-06 : SMDR Options - Minimum Call Duration
Enter the minimum duration of a call (1-65535) that will print on the SMDR report. Enter 0
to have calls of any duration print.
•35-01-07 : SMDR Options - Minimum Ringing Time
Enter how long an unanswered call must ring (1-65535) before SMDR logs it as "No
Answer). Enter 0 to allow all "No Answer" calls to print.
•35-02-01 : SMDR Output Options - Toll Restricted Call
Enter 1 if you want the SMDR report to include calls blocked by Toll Restriction. Enter 0 to
exclude blocked calls.
•35-02-02 : SMDR Output Options - PBX Calls
If system is behind a PBX, enter 1 to have SMDR include all calls to the PBX. Enter 0 to
have SMDR include only calls dialed using PBX trunk access code.
•35-02-03 : SMDR Output Options - Display Trunk Name or Number
Select whether the system should display the trunk name (0) or the number (1) on SMDR
reports. If this option is set to "1", Program 35-02-14 must be set to "0".
•35-02-04 : SMDR Output Options - Daily Summary
35-02-05 : Weekly Summary and
35-02-06 : Monthly Summary
Enter 1 to enable a summary report. Enter 0 to disable a summary report. The daily report
prints every day at midnight. The weekly report prints every Sunday night at midnight. The
monthly report prints at midnight on the last day of the month.
•35-02-08 : SMDR Output Options - Incoming Calls
Enter 0 if you want the SMDR report to include incoming calls. Enter 1 if you want the
SMDR report to exclude incoming calls.
Station Message Detail Recording
Features 337