NEC ASPILA EX Feature Manual page 186

Related Features
172 Features
Route Access.
•25-13-02 : System Option for DISA - Continue Code for DISA Trunk-to-Trunk
Enter a single digit Continue Code for the DISA call to use to immediately disconnect or con-
tinue their outside call.
•25-13-03 : System Option for DISA - Disconnect Code for DISA Trunk-to-Trunk
Enter a single digit Disconnect for the DISA call to use to immediately disconnect or continue
their outside call.
•80-03-01 : DTMF Tone Receiver Setup
80-04-01 : Call Progress Tone Detector Setup
If required, modify the criteria for dial tone detection and call progress tone detection for
DTMF tones for inbound DTMF DISA calls.
Automatic Route Selection
In a system with ARS enabled:
When a DISA caller dials 9 for an outside call (if allowed), the system routes the call via ARS.
In a system with ARS disabled:
When a DISA caller dials 9 for an outside call (if allowed), the system uses the routes pro-
grammed for Trunk Group Routing.
Central Office Calls, Answering
When a call is transferred because of Call Forwarding No Answer, Call Forwarding Busy, or
DND, the Reason for Transfer option can display to the transferred extension why the call is
ringing to their phone.
Direct Inward Dialing (DID) / Direct Inward Line (DIL) / Voice Response System
(VRS)
These features also allow outside callers to directly access system extensions.
Long Conversation Cutoff
Long conversation cutoff is controlled separately for DISA and tie lines.
Voice Response System (VRS)
Department Calling with Overflow Message requires a DSP daughter board for VRS.
Direct Inward System Access (DISA)
Aspila EX Software Manual