Class Of Service Options For Disa/E&M - NEC ASPILA EX Feature Manual

Program 20 : System Option Setup
20-14 : Class of Service Options for DISA/E&M
20-14 : Class of Service Options for DISA/E&M
Level:
IN
Description
Input Data
Class of Service Number
Item
No.
01 First Digit Absorption
For tie lines, enable or disable the ability to absorb (ignore) the first
incoming digit. Use this to make the tie trunk compatible with 3- and
4-digit tie line service. This option does not apply to DISA.
02 Trunk Group Routing/ARS Access
This option enables or disables a DISA or tie trunk caller's ability to
dial 9 for Trunk Group Routing or Automatic Route Selection (ARS).
03 Trunk Group Access
This option enables or disables a DISA or tie trunk caller's ability to
access trunk groups for outside calls (Service Code 814).
04 Common Abbreviated Dialing
This option enables or disables a DISA or tie trunk caller's ability to
use the system's Common Abbreviated Dialing.
05 Operator Calling
This option enables or disables a DISA or tie trunk caller's ability to
dial 0 for the telephone system operator.
06 Internal Paging
This option enables or disables a DISA or tie trunk caller's ability to
use the telephone system's Internal Paging.
07 External Paging
This option enables or disables a DISA or tie trunk caller's ability to
use the telephone system's External Paging.
08 Direct Trunk Access
This option enables or disables a DISA or tie trunk caller's ability to
use Direct Trunk Access (Service Code 815).
634 Programming
• Available.
Use Program 20-14 : Class of Service Options for DISA/E&M to enable/disable DISA and tie
line Class of Service options. You assign a DISA Class of Service to DISA users in Program 25-09.
Assign tie line Classes of Service in 34-02. Up to 15 DISA/E&M Classes of Service can be defined.
Analogue trunk-to-analogue trunk and ISDN trunk-to-ISDN trunk calls are supported by
Note:
this program. However, analogue trunk-to-ISDN trunk and ISDN trunk-to-analogue trunk
calls are NOT supported by this program.
Item
Aspila EX
01-15
Input
Data
COS 01-14
0-Off
1-On
0-Off
1-On
0-Off
1-On
0-Off
1-On
0-Off
1-On
0-Off
1-On
0-Off
1-On
0-Off
1-On
Aspila EX Software Manual
Default
COS 15
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0