NEC ASPILA EX Feature Manual page 302

Operation
288 Features
To Park a call in a system orbit:
You can Park Intercom or trunk calls.
1. Press Park key (PGM 15-07 or SC 852: *04 + orbit).
The Park key LED lights.
If you hear busy tone, the orbit is busy. Try another orbit.
2. Use Paging to announce call.
3. Press SPK to hang up.
If not picked up, the call will recall to you.
OR
1. At system phone or DSL, press HOLD.
OR
At a single line telephone, hookflash.
OR
At a DSL single line telephone, press FTR + PARK and then enter the orbit number (skip step
2 with this option).
2. Dial 831 and the Park orbit (1-64).
If you hear busy tone, the orbit is busy. Try another orbit.
3. Use Paging to announce call.
4. Press SPK to hang up.
If not picked up, the call will recall to you.
Note: The parked call recalls after the Park Hold Time (Program 24-01-06). The call
rings the extension to which it recalled for the Hold Recall Callback Time (Program 24-
01-02). The call then goes on Hold for the Park Hold Time - then recalls again for the
Hold Recall Callback Time. The call continues to cycle between Hold and recall until the
extension user answers the call or the outside party hangs up.
To pick up a parked call:
1. Lift handset.
2. Press Park key (PGM 15-07 or SC 852: *04 + orbit).
OR
1. At system phone, press idle CALL key.
OR
At single line telephone, lift handset.
OR
At a DSL single line telephone, press FTR + PARK and then enter the orbit number (skip step
2.
2. Dial 861 and the Park orbit (1-64).
Park
Aspila EX Software Manual