NEC ASPILA EX Feature Manual page 917

Item No.
03
04
Conditions
Feature Cross Reference
Telephone Programming Instructions
Aspila EX Software Manual
44-02 : Dial Analysis Table for ARS/F-Route Access
Item
Additional Data
Dial Tone Simulation
None
• Automatic Route Selection (ARS)/F-Route
To enter data for Program 44-02 (Dial Analysis Table for ARS/F-Route Access):
1. Enter the programming mode.
2. 44 02
44-02-01 Analyze TBL1
Dial
­ ¯
back
3. Enter the number of the item you want to program.
44-02-nn Analyze TBLnnn
nnnnn
¬
4. Select the Analyze Table number to be programmed by pressing the FLASH or the VOLUME
p or VOLUME q keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
Program 44 : ARS/F-Route Setup
Input Data
• 1- 0-255 (Delete Digit)
(255 : delete all digit)
• 2- [Program 44-01 : 0]
0-500 (ARS/F-Route table Number)
(0 : No setting) <Refer to Program 44-05>
[Program 44-01 : 1]
0-500 (ARS/F-Route select table Number)
(0 : No setting) <Refer to Program 44-04>
• 3- 0-4 (Dial Extension Analyze Table Number)
(0 : No setting) <Refer to Program 44-03>
0- off
1- on
select
®
Default
0
0
Programming 911