NEC ASPILA EX Feature Manual page 352

Related Features
Operation
338 Features
•35-02-09 : SMDR Output Options - Print Name or Number
Enter 0 if you want the SMDR report to include the extension's name. Enter 1 if you want the
SMDR report to include the extension's number.
•35-02-14 : SMDR Output Options - Date
Determine whether the date should be displayed on SMDR reports (0=not displayed, 1=dis-
played). This option must be set to "0" if the trunk name is set to be displayed in Program
35-02-03.
•35-02-16 : SMDR Output Options - Print Trunk Name or Received Dialed Number
Enter 0 if you want the SMDR report to print the trunk port name (as assigned in Program 14-
01-01). Enter 1 if you want the SMDR report to print the received dialed number. For DID
trunks, if the received number is not defined in Program 22-11-01, then no number will be
printed.
•80-05-01 : Date Format for SMDR and System Reports
Set the date format for SMDR (0=American, 1=Japanese or 2=European).
•90-12-01 : System Alarm Output - Output Port Type
Indicate the type of connection used for the SMDR (0-No setting, 1-COM port (NTCPU), 2-
USB port (NTCPU), 4-CTA/CTU).
•90-12-02 : System Alarm Output - Destination Extension Number
If the output port type (90-12-01) is set to CTA, enter the extension number with the CTA
connection.
•90-13-01 : System Information Output - Output Port Type
Indicate the type of connection used for the SMDR (0-No setting, 1-COM port (NTCPU), 2-
USB port (NTCPU), 4-CTA/CTU).
•90-13-02 : System Information Output - Destination Extension Number
If the output port type (90-13-01) is set to CTA, enter the extension number with the CTA
connection.
PBX Compatibility
To use the PBX Call Reporting option, program system for behind PBX operation.
Traffic Management Report (TMS)
Traffic Management Reports and SMDR should not use the same DCI port.
Once installed and programmed, SMDR operation is automatic.
Station Message Detail Recording
Aspila EX Software Manual