NEC ASPILA EX Feature Manual page 336

Programming
Related Features
322 Features
•15-07-01 : Programming Function Keys
Assign a function key for Call Forwarding (Device) (code 17) or Text Message (code 18). The Call
Forwarding Device key allows the user to select a message each time they activate the feature,
while the Text Message key automatically selects the message used when programming the key.
•20-02-07 : System Options for System Telephones - Time and Date Display Mode
Set the System Time and Date display mode. The time that displays in Selectable Display
Messages follows this setting.
•20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
•20-13-19 : Class of Service Options (Supplementary Service) - Selectable Display Messaging
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to use
Selectable Display Messaging.
•20-16-01 : Selectable Display Messages
Program the Selectable Display Messages (1-20). Refer to the chart below for character entry.
Use this keypad digit . . .
1
2
3
4
5
6
7
8
9
0
*
#
CONF
FLASH
Do Not Disturb
The DND key blinks when an extension is forwarded and it does not have Programmable
Function Key programmed for 16 or 17.
Programmable Function Keys
Function keys simplify Selectable Display Messaging operation.
Selectable Display Messaging
When you want to. . .
Enter characters:
1 @ [ ¥ ]
Enter characters A-C, a-c, 2.
Enter characters D-F, a-f, 3.
Enter characters G-I, g-i, 4.
Enter characters J-L, j-l, 5.
Enter characters M-O, m-o, 6.
Enter characters P-S, p-s, 7.
Enter characters T-V, t-v, 8.
Enter characters W-Z, w-z, 9.
Enter characters:
0 ! " # $ %
Enter characters:
* + , - . /
# = Accepts an entry (only required if two letters on the
same key are needed - ex: STA)
Clear the character entry one character at a time.
Clear all the entries from the point of the flashing cursor
and to the right.
^ _ ' { | }
& <space> (
: ; < = > ?
Aspila EX Software Manual
> <
)