Repeat Redial - NEC ASPILA EX Feature Manual

Repeat Redial

• Available
Description
Conditions
Default Setting
Programming
Aspila EX Software Manual
If a system phone user places a trunk call that is busy or unanswered, they can have Repeat Redial
try it again later on. The user doesn't continually have to try the number again -- hoping it will go
through. Repeat Redial automatically retries it until the called party answers (the number of retries
is based on system programming).
Lifting the handset will cancel Repeat Redial.
Enabled.
•15-07-01 : Programming Function Keys
Assign a function key for Repeat Redial (code 29).
•20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
•20-08-07 : Class of Service Options (Outgoing Call Service) - Repeat Redial
In an extension's Class of Service, enable (1) or disable (0) an extension's ability to use
Repeat Redial.
•21-08-01 : Repeat Dial Setup - Repeat Redial Count
Set how many times Repeat Redial will automatically repeat if the call does not go through.
•21-08-02 : Repeat Dial Setup - Repeat Redial Interval Time
Set the interval between Repeat Redial attempts (0-64800 seconds).
•21-08-03 : Repeat Dial Setup - Repeat Dial Calling Timer
Set how long the system waits (0-64800 seconds) for the called party to answer after a Repeat
Redial. If the called party doesn't answer within this interval, the system hangs up and tries
again (after the Repeat Redial Interval Time). For unanswered calls, the total time between
retries in the sum of Items 21-08-02 and 21-08-03.
Aspila EX
Repeat Redial
Features 301