Program 90 : Maintenance Program
90-06 : Trunk Control
90-06 : Trunk Control
Level:
SA
Description
Input Data
Conditions
Feature Cross Reference
1032
Programming
•
Available.
Use Program 90-06 : Trunk Control is used for the trunk maintenance. Busy Out lets you block a
PCB from placing outgoing calls (just like placing the PCB switch down). Once busied out, none of
the ports on the PCB can be used for new calls. Existing calls, however, are not torn down.
Menu Number
None
None
Aspila EX
1- Reset/Release Busy Out
Trunk Port Number
1-200
0- Set Busy Out
Aspila EX Software Manual