NEC ASPILA EX Feature Manual page 249

Related Features
Operation
Aspila EX Software Manual
•15-06-01 : Trunk Access Map for Extensions
For Outgoing Line Preference and Auto-Answer of Non-Ringing Lines, assign trunk Access
Maps to extensions.
•20-10-07 : Class of Service Options (Answer Service) - Automatic Answer of Universal Calls
Enable (1) or disable (0) an extension's ability to use Universal Auto Answer for non-ringing
lines.
•22-01-01 : System Options for Incoming Calls - Incoming Call Priority
Determine if ringing Intercom calls (0) or ringing trunk calls (1) should have answer priority.
See the table below for interaction.
•22-04-01 : Incoming Extension Ring Group Assignment
Assign extensions to ring groups (1-100). Auto-Answer for Non-Ringing Lines only works for
trunks that do not ring an extension.
•22-05-01 : Incoming Trunk Ring Group Assignment
Assign trunks to ring groups (1-100). Auto-Answer for Non-Ringing Lines only works for
trunks that do not ring an extension.
•23-03-01 : Universal Answer/Auto Answer
For each extension, select the route that it will use for Auto-Answer for Non-Ringing Lines.
The routes correspond to the Trunk Group Routing table set in Program 14-06.
Direct Inward Line
DILs do not affect Incoming Line Preference operation.
Ring Groups
Trunks ring extensions according to Ring Group programming.
Trunk Group Routing
If an extension gets trunk dial tone when the user lifts the handset, the system uses the "dial 9"
routing to select the trunk.
To answer a ringing call if your phone has Ringing Line Preference:
1. Refer to the chart on the previous page.
To place a call if your phone has Outgoing Line Preference:
1. Refer to the chart on the previous page.
Line Preference
Features 235