NEC ASPILA EX Feature Manual page 185

Aspila EX Software Manual
•25-03-01 : DID/DISA Transfer Ring Group With Incorrect Dialing
Set the operating mode of each DISA trunk. This sets what happens to the call when the DISA
caller dials incorrectly. The call can either disconnect (0), transfer to an alternate ring group
destination (1-100), or transfer to DSPDB Voice Mail (101) or In-Skin Voice Mail (102).
•25-04-01 : DID/DISA Transfer Ring Group With No Answer/Busy
Set the operating mode of each DISA trunk. This sets what happens to the call when the DISA
caller calls a busy or unanswered extension. The call can either disconnect (0), transfer to an
alternate ring group destination (1-100), or transfer to DSPDB Voice Mail (101) or In-Skin
Voice Mail (102).
•25-07-01 : System Timers for DID/DISA - DISA Dial Tone Time
After answering the DISA trunk, the system waits this interval (0-64800 seconds) for the
caller to dial the first digit of the password. If the caller fails to dial within this interval, the
system drops the call.
•25-07-02 : System Timers for DID/DISA - DID/DISA No Answer Time
A DISA caller can ring an extension for this interval (0-64800 seconds) before the system sets
the call as a Ring No Answer. After this interval expires, the call follows the programmed
Ring No Answer routing (see Program 25-04 below).
•25-07-07 : System Timers for DID/DISA -DISA Conversation Warning Tone Time
Determine the length of time a DISA caller can talk before the Long Conversation tone is
heard (0-64800 seconds).
•25-07-08 : System Timers for DID/DISA - DISA Long Conversation Disconnect
This timer determines how long the system will wait before disconnecting a call after the
Long Conversation tone is heard (0-64800 seconds).
•25-07-09 : System Timers for DID/DISA - DISA Internal Paging Time
This is the maximum length of an Internal Page placed by a DISA caller. If the Page contin-
ues longer than this interval (0-64800 seconds), the system terminates the DISA call.
•25-07-10 : System Timers for DID/DISA - DISA External Paging Time
This is the maximum length of an External Page placed by a DISA caller. If the Page contin-
ues longer than this interval (0-64800 seconds), the system terminates the DISA call.
•25-07-13 : System Timers for DID/DISA - DID/DISA Busy Tone Interval
If a DISA caller dials a busy extension (and Program 25-04 = 0), the system plays busy tone
for this interval before disconnecting.
•25-08-01 : DISA User ID Setup
For each DISA user, set the 6-digit password.
•25-09-01 : Class of Service for DISA Users
Assign a DISA Class of Service for each user. The DISA Class of Service cannot be 0. You
cannot use the 20-xx-xx and 42-xx-xx programs to assign Class of Service to DISA trunks (15
users, with one password and DISA Class of Service (1-15) for each user).
•25-10-01 : Trunk Group Routing for DISA
Use this program to assign the Trunk Group Route (1-100) chosen when a user places a DISA
call into the system and dials 9. Set Trunk Group Routing in Program 14-06. If the system has
ARS, dialing 9 accesses ARS. The route chosen is based on the DISA Class of Service, which
is determined by the password the caller dials.
•25-11-01 : DISA Toll Restriction Class
If the system uses Toll Restriction, enter a Toll Restriction Class (1-15) for each DISA user
(1-15). The system uses the Toll Restriction Class you enter in Program 21-05. The Toll
Restriction Class assigned to a DISA call is based on the DISA Class of Service, which is
determined by the password the caller dials. You cannot use Program 21-04 to assign Toll
Restriction to DISA trunks.
•25-12-01 : Alternate Trunk Group Routing for DISA
Assign the trunk route that DISA Caller's access if they dial the Alternate Trunk Route
Access Code. Refer to "Central Office Calls, Placing" for more on setting up Alternate Trunk
Direct Inward System Access (DISA)
Features 171