NEC ASPILA EX Feature Manual page 51

To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter
Use this key...
Code: 54
Operation: Press
key
Code: 55
Operation: Do not
lift handset + Press
key + Enter exten-
sion number + Enter
name + Press HOLD
Code: 66
Operation: Press
key + ext or outside
number
Code: 67 + ext or
Message Center
number
Operation: Press
key
Code: 68 + 0-2
Operation: Press
key
Code: 69 + 0
Operation: Set up
call + Press key
Code: *01 + Trunk
number (001-200)
Operation: Press
key
Code: *02 + Trk
group (1-9 or 001-
200)
Operation: Press
key
Code: *03 + ext. or
department group
Operation: Press
key
Aspila EX Software Manual
Table 5: Function Key Codes by Number
the code (e.g., 48 for Voice Over).
For this feature...
Call Forward, Off-
Premise
Name Storing
Data Communications
Voice Mail
Central Office Calls
Trunk Groups
Multiple Directory
Numbers/Call Coverage
When you are...
Forwarding a Door Box call
to an external phone number
Changing the name dis-
played on your display phone
Setting up a Data Call
Calling Voice Mail or
leaving a message
Using Voice Mail Service
Using Voice Mail Record
Pressing a line key to place or
answer a trunk call (where
trunks are 001-200)
Using a trunk group key to
access a Trunk Group
Multiple Directory Number:
Placing or answering a call
from your virtual (phantom)
extension or Call Coverage:
Placing or answering a call to
your co-worker's extension
Charts and Illustrations
Key Lamp Status
On red when
activated
None
On red when call set
up
Flashes green on
your key for your
messages or red for
the Message Center
Flashes slowly when
monitoring
Slow Flash red when
active
On green when
seized, on red when
in use (by other
party), Slow Flash
green when ringing,
Hold flash when on
Hold
On red when active
Slow Flash red when
ringing, On red
when busy
Also see
Srvc Code
822
800
-
717
-
805
804
-
Features 37