NEC ASPILA EX Feature Manual page 74

Account Codes
Operation (Cont'd)
60 Features
To enter an Account Code while placing a trunk call:
If your system has Forced Account Codes, you must follow this procedure.
1. Access trunk for outside call.
You can access a trunk by pressing a line key or dialing a code. Refer to Central Office
Calls, Placing for more information.
With Forced Account Codes, you hear, "Please enter an Account Code." Your display
shows: ENTER ACCOUNT CODE.
2. Dial *.
3. Dial your Account Code (1-16 digits, using 0-9 and #).
4. Dial *
If the system has Forced Account Codes and you don't enter a code, your call cannot
go through. You can, however, dial ** to bypass Forced Account Code entry.
5. Dial number you want to call.
If you hear "stutter" dial tone after dialing the number, ARS is requesting you to enter
an ARS Authorization Code. Refer to the Automatic Route Selection feature for more
information on ARS Authorization Codes.
To enter an Account Code at a single line set:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to Central Office Calls, Placing for
more information.
With Forced Account Codes, you hear, "Please enter an Account Code." Your display
shows: ENTER ACCOUNT CODE.
2. Dial *.
3. Enter Account Code (1-16 digits).
4. Dial *.
5. Dial number you want to call.
If you hear "stutter" dial tone after dialing the number, ARS is requesting you to enter
an ARS Authorization Code. Refer to the Automatic Route Selection feature for more
information on ARS Authorization Codes.
Aspila EX Software Manual