90-13 : System Information Output
Level:
IN
Description
Input Data
Item No.
01
02
03
Conditions
Feature Cross Reference
Aspila EX Software Manual
Program 90 : Maintenance Program
•
Available.
Use Program 90-13 : System Information Output to define the output port to be used as the sys-
tem information output. The baud rate for the COM port should be set in Program 10-21-02.
Item
Output Port Type
Indicate the type of connection
used for the SMDR.
Destination Extension Number
If the output port type (item 1) is
set to CTA, enter the extension
number with the CTA connection.
Output Command
Dialing 1 from this program sends
the system report to the connected
device.
None
None
90-13 : System Information Output
Aspila EX
Input Data
0- No setting
1- COM port (NTCPU)
2- USB port (NTCPU)
3- -- Reserve –
4- CTA/CTU
Extension Number
(Up to 8 digits)
Dial 1 and press HOLD
(Press only HOLD key for cancel)
Default
0
No setting
-
Programming
1045