NEC ASPILA EX Feature Manual page 203

Hide thumbs Also See for ASPILA EX:
Table of Contents

Advertisement

Programming
Related Features
Operation
Aspila EX Software Manual
•10-03-01 : PCB Setup - Channel 1 Terminal Type
10-03-06 : PCB Setup - Channel 2 Terminal Type
Set the terminal type to "8" for Door Box usage.
•32-01-01 : Door Box Timers - Door Box Answer Time
Set the interval within which a user must answer the Door Box chimes.
•32-01-02 : Door Box Timers - Door Lock Cancel Time
Set the length of time the Door Box strike stays open when the single line user hook flashes or
system phone user presses Flash.
•32-02-01 : Door Box Ring Assignments
Determine which Door Boxes (1-8) should ring which extensions.
•32-03-01 : Door Box Basic Setup - Chime Pattern
Set the chime pattern (0-6) for each Door Box.
•32-03-02 : Door Box Basic Setup - CODEC Transmit Gain Setup
32-03-03 : Door Box Basic Setup - CODEC Receive Gain Setup
Select the CODEC gain types (1-63) each Door Box (1-8).
Paging, External
If a 2PGDAD has a Door Box connected, you cannot use that port for External Paging.
Single Line Telephones, Analogue Single Line Sets
Door Boxes can ring single line phones if allowed in programmed.
To call a Door Box:
System Phone
1.
Press idle CALL key.
2.
Dial 802.
3.
Dial Door Box Number (1-8).
Single Line Telephone
1.
Lift handset.
2.
Dial 802.
3.
Dial Door Box Number (1-8).
To activate the Door Box strike:
System Phone
1.
While talking to the Door Box, press the Flash key.
Single Line Telephone (Not Available for DSL Phones)
1.
While talking to the Door Box, hookflash.
To answer a Door Box chime:
1.
Lift handset.
Door Box
Features
189

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents