Hold - NEC ASPILA EX Feature Manual

Hide thumbs Also See for ASPILA EX:

Table of Contents

Hold

Default Setting

Aspila EX Software Manual

Hold lets an extension user put a call in a temporary waiting state. The caller on Hold hears silence

or Music on Hold, not conversation in the extension user's work area. While the call waits on Hold,

the extension user may process calls or use a system feature. Calls left on Hold too long recall the

extension that placed them on Hold. There are four types of Hold:

An outside call a user places on Hold flashes the line key (if programmed) at all other keysets.

Any system phone user with the flashing line key can pick up the call.

Exclusive Hold

When a user places a call on Exclusive Hold, only that user can pick up the call from Hold.

The trunk appears busy to all other keysets that have a key for the trunk. Exclusive hold is

important if a user doesn't want a co-worker picking up their call on Hold.

If a user places a call on Group Hold, another user in the Department Group can dial a code to

pick up the call. This lets members of a department easily pick up each other's calls.

Intercom Hold

A user can place an Intercom call on Hold. The Intercom call on Hold does not indicate at any

other extension.

Hold Recall to Operator

Hold Recall to Operator enhances how the system handles calls that have been left on hold too

long. With Hold Recall to Operator:

A trunk call recalls the extension that placed it on Hold after the Hold/Exclusive Hold Recall

The recalling trunk will ring the extension that placed it on Hold for the Hold/Exclusive Hold

Recall Callback Time.

After the Hold/Exclusive Hold Recall Callback Time, the trunk call will ring the operator.

Hold Recall to Operator applies to trunk calls placed on System Hold, Exclusive Hold and Group

Hold. It does not apply to Intercom calls.

The called extension must lift the handset or press the SPK key before the call can be placed on

Show Quick Links

Table of Contents