Add / Delete Digit For E&M Tie Line - NEC ASPILA EX Feature Manual

Program 34 : Tie Line Setup
34-06 : Add / Delete Digit for E&M Tie Line
34-06 : Add / Delete Digit for E&M Tie Line
Level:
IN
Description
Input Data
Conditions
Feature Cross Reference
822 Programming
• Available.
Use Program 34-06 : Add / Delete Digit for E&M Tie Line to set digits that the system should
add or delete for tie lines.
• Delete Digit
Some tie line networks pass the location number and extension number to the remote side.
This program allows the system to ignore such numbers for a call.
If individual extensions do not want to receive an incoming call, you could delete all of the
digits including the extension number.
• Add Digit
If a tie line network requires additional digits to reroute the call to a location, the digits for the
location can be added to the received digits.
Incoming trunk group Number
Item
Item
No.
01 Delete Digit
02 Additional Dial Digits
None
• Tie Lines
Aspila EX
001-100
Input Data
0-255 (255 : delete all digits)
Up to 4 digits
Aspila EX Software Manual
Default
0
No setting