NEC ASPILA EX Feature Manual page 133

Operation
Aspila EX Software Manual
To answer an incoming trunk call:
1. Lift handset.
2. At system phone, press flashing line key.
If you don't have a line or loop key for a trunk call ringing your phone, it rings an idle
CALL key.
If you have Ringing Line Preference, lifting the handset answers the call.
You can dial after answering the call. This allows you, for example, to respond to com-
puter-generated incoming calls.
OR
1. If you know the specific line number, dial 772 + Line number (001-200).
To use Universal Answer to answer a call ringing over the Paging system:
1. At system phone, press idle CALL key.
OR
At single line set, lift handset.
Depending on system programming, this may answer the call and you can skip Step 2.
2. Dial 872.
If you hear error tone, your extension's Class of Service prevents Universal Answer.
To listen to the incoming trunk ring choices (system phone only):
1. Press idle CALL key.
2. Dial 811 + 2.
3. Select the ringing (1-8) and tone range (1-4) you want to check.
4. Go back to step 3 to listen to additional choices or press SPK to hang up.
To change the pitch of your incoming trunk ring (system phonesystem phone only):
1. Press idle CALL key.
2. Dial 820 + 2.
3. Select the ringing (1-8).
4. Press SPK to hang up.
Central Office Calls, Answering
Features 119