Dial Tone Detection
•
Available
•
Allocating NTCPU circuits for Dial Tone Detection is required.
•
Tone Detection Setup is available.
•
The Next Trunk in Rotary if No Dial Tone option is available.
Description
Conditions
Default Setting
Aspila EX Software Manual
If a trunk has Dial Tone Detection enabled, the system monitors for dial tone from the telco or PBX
when a user places a call on that trunk. If the user accesses the trunk directly (by pressing a line key
or dialing 805 and the trunk's number), the system will drop the trunk if dial tone does not occur. If
the user access the trunk via a Trunk Group (by dialing a trunk group code or automatically through
a feature like Last Number Redial), the system can drop the trunk or optionally skip to the next
trunk in the group. Refer to the chart under Programming below for more.
Dial Tone Detection is available for the following features:
•
Automatic Route Selection
•
Abbreviated Dialing
•
Central Office Calls, Placing
•
Last Number Redial
•
Loop Keys (outbound)
•
Save Number Dialed
•
T1 Trunking (with ANI/DNIS Compatibility)
•
Tie Lines
•
Trunk Group Routing
•
Trunk Groups
None
Disabled for manually dialed calls; enabled for automatically dialed calls.
Aspila EX
Dial Tone Detection
Features
157