NEC ASPILA EX Feature Manual page 641

Item
No.
09 Forced Trunk Disconnect <Not for ISDN T-point>
This option enables or disables a tie trunk caller's ability to use
Forced Trunk Disconnect (Service Code *26). This option is not
available to DISA callers.
10 Call Forward Setting by Remote Via DISA
11 DISA/Tie Trunk Barge In
This option enables or disables a DISA or tie trunk caller's ability to
use the Barge In feature.
Conditions
Feature Cross Reference
Telephone Programming Instructions
Aspila EX Software Manual
Program 20 : System Option Setup
20-14 : Class of Service Options for DISA/E&M
Item
None
• Class of Service
• Direct Inward System Access (DISA)
• Tie Lines
To enter data for Program 20-14 (Class of Service Options for DISA/E&M):
1. Enter the programming mode.
2. 20 14
20-14-01 FCTN Cls1
Del._1digit_Dial
­ ¯
back
3. Enter the number of the item you want to program.
20-14-nn FCTN Clsnn
nnnnn
¬
4. Select the Class of Service number to be programmed by pressing the FLASH or the VOL-
UME p or VOLUME q keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MSG once to enter a new item number.
OR
Press MSG until you've exited that series's programming section.
O:Of
select
®
Default
Input
Data
COS 01-14
0-Off 0
1-On
0-Off 0
1-On
0-Off 0
1-On
Programming
COS 15
0
0
0
635