System Options For Single Line Telephones - NEC ASPILA EX Feature Manual

20-03 : System Options for Single Line Telephones

Level:
IN
Description
Input Data
Item
Item
No.
01 SLT Call Waiting
Answer Mode
02 Ignore Received DP
Dial on DTMF SLT
Port
03 SLT DTMF Dial to
Trunk Lines
Aspila EX Software Manual
Program 20 : System Option Setup
20-03 : System Options for Single Line Telephones
• Available.
Use Program 20-03 : System Options for Single Line Telephones to set up various options for
Single Line Telephones.
Input Data
0 = Hook Flash
1 = Hook Flash + Service
code (894)
0 = Do Not Ignore
1 = Ignore
0 = Receive all dialed
data, before sending.
1 = Direct through out
Aspila EX
Description
For a busy single line (500/
2500 type) telephone, set the
mode used to answer a
camped-on trunk call.
For ESL sets, enabling this
option (1) allows the user to
dial Service Code 754 for
Voice Mail Conversation
Record.
Use this option to define
whether the system should
receive dial pulse and DTMF
signals (0) or ignore dial
pulse and only accept DTMF
signals (1).
• Type 0 : The system
keeps the digits dialed by
the SLT on a trunk in a
buffer. After all the digits
have been received, the
system sends all the dig-
its to the trunk. If the
time space between dig-
its is longer than the
timer in Item 4, the sys-
tem considers all digits
received.
• Type 1 : The system
passes the received dig-
its from the SLT to the
trunk immediately. If the
SLT has a Last Number
Dial key without a pause,
this key may not be able
to use the Last number
dialing key with the Type
1 setting.
Related
Default
Program
0 11-12-47
0 15-03-01
0 20-03-04
Programming 607