Trunk Group Routing - NEC ASPILA EX Feature Manual

Program 14 : Trunk Basic Setup

14-06 : Trunk Group Routing

14-06 : Trunk Group Routing
Level:
IN
Description
Input Data
550 Programming
• Available.
Use Program 14-06 : Trunk Group Routing to set up an outbound routing table for the trunk
groups you assigned in Program 14-05. When users dial 9, the system routes their calls in the order
(priority) you specify. For example, if a user dials 9 and all calls in the first group are busy, the sys-
tem may route the call to another group. Trunk Access Map programming (Programs 14-07) may
limit this option. The system contains 100 routing tables for trunk access. Each table has four prior-
ity orders for trunk access.
Example for setting:
With less than 4 trunk groups,
Route number 1
For the above setting, if all the lines in trunk group 1 are busy, the system searches for an
idle line in trunk group 2.
With more than 4 trunk groups,
Route number 1
Route number 2
For the above setting, if all the lines in the trunk group 1, 2 and 3 are busy, the system
searches for an idle line in trunk group 4 and 5.
Route Table Number
Priority Order
Number
1-4 0- not specify
001-100 : (Trunk Group Number)
101-150 : (100 + Network System Number)
1001-1100 : (1000 + Route Table Number)
Aspila EX
: Order 1 – Trunk group 1
: Order 2 – Trunk group 2
: Order 1 – Trunk group 1
: Order 2 – Trunk group 2
: Order 3 – Trunk group 3
: Order 4 – 1002 (Jump to Route number 2)
: Order 1 – Trunk group 4
: Order 2 – Trunk group 5
Input Data
1-100
Related Program
14-01-07
14-05
15-01-02
21-02
Aspila EX Software Manual