Department Group Assignment For Extensions - NEC ASPILA EX Feature Manual

Program 16 : Department Group Setup

16-02 : Department Group Assignment for Extensions

16-02 : Department Group Assignment for Extensions
Level:
IN
Description
Input Data
Group
Priority
Number
1-64 1-999
Conditions
Feature Cross Reference
598 Programming
• Available.
Use Program 16-02 : Department Group Assignment for Extensions to set the Department
Groups. The system uses these groups for Department Calling. Assign pilot numbers to Department
Groups you set up in Program 16-01. This lets system users place calls to the departments. Also use
this program to set the priority of each extension within each Department Group. When a call
comes into the group, it may ring the extensions in order of their priority.
Extension Number
Default
1 – xxx Set up the Department Group called by the pilot number
(See Note and the extension priority when a group is called.
Below) Call Pickup Groups are set up in 23-02.
Note: The initial value of a priority becomes the ports numerical order assigned in Program 11-02
and 11-04.
None
• Department Calling
Aspila EX
Max. 8 digits
Description
Aspila EX Software Manual
Related
Program
11-07