Program 24 : Hold/Transfer Setup
24-01 : System Options for Hold
Program 24 : Hold/Transfer Setup
24-01 : System Options for Hold
Level:
IN
Description
Input Data
Item No.
01
Hold Recall Time
A call on Hold recalls the extension that
placed it on Hold after this interval. This
timer works with the Hold Recall Callback
Timer (Item 2).
02
Hold Recall Callback Time
A trunk recalling from Hold or Park rings an
extension for this interval. This timer works
with timer 01 (Hold Recall Time) or timer 06
and 07 (Park Recall Time). After this inter-
val, the system invokes the Hold recall time
again. Cycling between timer 01 and 02 and
06 and 07 continues until a user answers the
call.
03
Exclusive Hold Recall Time
A call left on Exclusive Hold recalls the
extension that placed it on Hold after this
interval.
04
Exclusive Hold Recall Callback Time
An Exclusive Hold Recall rings an extension
for this interval. If not picked up, the call
goes back on System Hold.
05
Forced Release of Held Call
Depending on the setting of Program
14-01-16, the system disconnects calls on
Hold longer than this interval.
06
Park Hold Time - Normal
A call left parked longer than this interval
recalls the extension that initially parked it.
07
Park Hold Time - Extended
A call left parked longer than this interval
recalls the extension that initially parked it.
Conditions
724
Programming
•
Available.
Use Program 24-01 : System Options for Hold to define the system options for the Hold feature.
Item
None
Aspila EX
Input Data
Default
0-64800 (Sec.)
90
0-64800 (Sec.)
30
0-64800 (Sec.)
90
0-64800 (Sec.)
30
0-64800 (Sec.)
1800
0-64800 (Sec.)
90
0-64800 (Sec.)
300
Aspila EX Software Manual
Related Program
14-01-16
20-11-19
20-11-19