Dial Analysis Table For Ars/F-Route Access - NEC ASPILA EX Feature Manual

Program 44 : ARS/F-Route Setup

44-02 : Dial Analysis Table for ARS/F-Route Access

44-02 : Dial Analysis Table for ARS/F-Route Access
Level:
IN
Description
Input Data
Item No.
01
02
910 Programming
• Available.
Use Program 44-02 : Dial Analysis Table for ARS/F-Route Access to set the Pre-Transaction
Table for selecting ARS/F-Route.
• Service Type 1 (Extension number)
The number goes to an extension after deleting the front digit(p).
Additional data
Assign the digit(p) to be deleted on top of the number for extension number usage. There
must be at least one digit deleted.
• Service Type 2 (ARS/F-Route select)
The number is controlled by ARS/F-Route table.
Additional data
Assign the ARS/F-Route table number for Program 44-05. (If the ARS/F-Route Time sched-
ule is not used.) Assign the ARS/F-Route selection number for Program 44-04. (If the ARS/
F-Route Time schedule is used.)
• Service Type 3 (Dial Extension Analyze Table select)
The total length of the number exceeds more than 5 digits.
Additional data
Assign the referring Dial Extension Analyze Table number for Program 44-03.
Dial Analysis Table Number
Item
Dial
Service Type
Aspila EX
Input Data
Up to 8 digits
0- No setting
1- Select extension call
2- Select "ARS/F-Route Table"
3- Select "Dial Extension Analyze Table"
1-120
Default
No setting
0
Aspila EX Software Manual