NEC ASPILA EX Feature Manual page 248

Programming
234 Features
•14-05-01 : Trunk Groups
For Auto-Answer of Non-Ringing Lines, assign trunks to trunk groups. This is part of Trunk
Group Routing programming.
•14-06-01 : Trunk Group Routing
For Auto Answer of Non-Ringing Lines, program the Trunk Group Routing table. Auto
Answer uses this table to determine the answer sequence for ringing calls.
•14-07-01 : Trunk Access Map Setup
For Outgoing Line Preference and Auto-Answer of Non-Ringing Lines, set up the Trunk
Access Maps (1-200).
•15-01-02 : Basic Extension Data Setup - Outgoing Trunk Line Preference
Enable (1) or disable (0) Outgoing Trunk Line Preference for extensions.
•15-02-09 : System Telephone Basic Data Setup - Ringing Line Preference for Intercom Calls
Enable Idle (0) or Ringing (1) Line Preference for Intercom calls. See the table below for
interaction.
•15-02-10 : System Telephone Basic Data Setup - Ringing Line Preference for Trunk Calls
Enable Idle (0) or Ringing (1) Line Preference for trunk calls. See the table below for interaction.
Program
15-02-09
(Intercom
Preference)
0
0
0
0
0
0
1
1
1
1
1
1
Note: Program 22-01-01 sets Intercom (0) or trunk (1) call priority.
Ringing
15-02-10 Intercom
Call
(Trunk
Preference)
0 X
0 X
0 -
1 X
1 X
1 -
0 X
0 X
0 -
1 X
1 X
1 -
Line Preference
Ringing
Trunk
Call
Lifting the handset
X
Seizes idle line appearance.
- Seizes idle line appearance.
X
Seizes idle line appearance.
X
If Program 22-01-01 is 1, answers ring-
ing trunk.
If Program 22-01-01 is 0, seizes idle
line appearance.
-
If Program 22-01-01 is 1, seizes idle
line appearance.
If program 22-01-01 is 0, seizes line
appearance,
X
Answers ringing trunk.
X
Seizes idle line appearance.
-
Answers ringing line appearance.
X
Seizes idle line appearance.
X
If Program 22-01-01 is 1, answers
ringing trunk.
Intercom call then rings second line
appearance. If Program 22-01-01 is
0, answers Ring line appearance.
-
Answers ringing Intercom call
(Line appearance).
X
Answers ringing trunks.
Aspila EX Software Manual