Trunk Access Map Setup - NEC ASPILA EX Feature Manual

Program 14 : Trunk Basic Setup

14-07 : Trunk Access Map Setup

14-07 : Trunk Access Map Setup
Level:
IN
Description
Input Data
Trunk Port Number
001-200
Default
Conditions
Feature Cross Reference
552 Programming
• Available.
Use Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an
extension's access options for trunks. For example, an extension can only place outgoing calls on
trunks to which it has outgoing access. There are 200 Access Maps with all 200 trunk ports pro-
grammed in Map 1 with full access.
An extension can use one of the maps you set up in this program. Use Program 15-06 to assign
Trunk Access Maps to extensions. Each trunk can have one of eight access options for each Access
Map.
Access Map Number
0- No access
1- Outgoing access only
2- Incoming access only
3- Access only when trunk on Hold
4- Outgoing access and access when trunk on Hold
5- Incoming access and access when trunk on Hold
6- Incoming and Outgoing access
7- Incoming access, outgoing access and access when trunk on Hold
• Access Map 1 = Trunk Ports 1-200 assigned with option '7' access (incoming and outgoing
access and access when trunk is on Hold).
• Access Maps 2-200 - Trunk Ports 1-200 assigned with option '0' access (no access).
None
• Central Office Calls, Answering
• Central Office Calls, Placing
Aspila EX
1-200
Input Data
Aspila EX Software Manual