NEC ASPILA EX Feature Manual page 177

Related Features
Aspila EX Software Manual
Direct Inward Dialing (DID) or Direct Dial In (DDI)
•22-11-04 : DID Translation Table Number Conversion - Transfer Operation Mode
For each DID Translation Table entry (1-2000), specify the condition required to transfer to
the call to the destination defined in 22-11-05 and 22-11-06.
•22-11-05 : DID Translation Table Number Conversion - Transfer Destination 1
22-11-06 : DID Translation Table Number Conversion - Transfer Destination 2
For each DID Translation Table entry (1-2000), specify the first and second Transfer Destina-
tions if the callers receives a busy or no answer (action defined in 22-11-04).
(Destination Options: 0 = No setting, 1-100 = Incoming Group, 101 = Voice Mail, 102 = In-
Skin Voice Mail, 01-264 = Extension Group, 400 = DID, 401 = DISA, 1000-1999 = Abbrevi-
ated Number (000-999))
If the Transfer Destinations are busy or receive no answer, those calls are transferred
to the final transfer destination (Program 22-10).
•22-11-07 : DID Translation Table Number Conversion - Call Waiting
For each DID Translation Table entry (1-2000), specify whether Call Waiting should be
allowed (0=disable, 1=enable).
•22-11-08 : DID Translation Table Number Conversion - Maximum Number of Calls
For each DID Translation Table entry (1-2000), specify the maximum number of DID calls
(0-200).
•22-11-09 : DID Translation Table Number Conversion - MOH Source
For each DID Translation Table entry (1-2000), specify the source of music to be used for
DID trunks (0=IC/MOH port, 1=BGM port, 2=ACI port).
•22-11-10 : DID Translation Table Number Conversion - ACI Music Source Port
For each DID Translation Table entry (1-2000), if item 2 is selected in 22-11-09, specify the
port to be used for the source of music heard on DID trunks.
•22-12-01 : DID Intercept Ring Group
For each DID Translation Table, program the DID Intercept destination. The destination can
be a Ring Group (1-100), DSPDB Voice Mail=101, or In-Skin Voice Mail=102. This pro-
gram is used when there is no destination programmed in Program 22-12-05. It is unrelated to
Program 22-12-06.
•22-13-01 : DID Trunk Group to Translation Table Assignment
Assign the DID trunk groups (1-100) to translation tables. If all the DID trunks use the same
type of DID service, you may have only one DID trunk group and one DID Translation Table
(with many entries).
•34-01-02 : E&M Tie Line Basic Setup - DID/E&M Incoming Signaling Type
Enter 0 if DID trunk is Dial Pulse (DP). Enter 1 if DID trunk is DTMF.
•80-03-01 : DTMF Tone Receiver Setup
80-04-01 : Call Progress Tone Detector Setup
If required, modify the criteria for dial tone detection and call progress tone detection to set
the DTMF criteria for DTMF DID calls.
•81-02-01 : DIOPU Initial Data Setup
Make sure the DID Trunk Timer settings are compatible with your local telco.
Central Office Calls, Answering
When a call is transferred because of Call Forwarding No Answer, Call Forwarding Busy, or
DND, the Reason for Transfer option can display to the transferred extension why the call is
ringing to their phone.
Direct Inward Line (DIL)
DILs also provide a way for outside callers to dial a system extension, virtual extension or
Department Group directly.
Features 163