Program 35 : Smdr And Account Code Setup; Smdr Options - NEC ASPILA EX Feature Manual

Program 35 : SMDR and Account Code Setup

35-01 : SMDR Options

Level:
IN
Description
Input Data
Conditions
Aspila EX Software Manual
Program 35 : SMDR and Account Code Setup
• Available.
Use Program 35-01 : SMDR Options to set the SMDR (Station Message Detail Recording)
options for each of the 8 SMDR ports. Refer to the following chart for a description of each option,
its range and default setting.
SMDR Port Number
Item
No.
01 Output Port Type
This option specifies the type of connection
used for SMDR. The baud rate for the COM
port should be set in Program 10-21-02.
02 Output Destination Number
This option specifies the SMDR printer output
port (CTA/CTU port number).
03 Header Language
Specify the language in which the SMDR
header should be printed.
04 Omit Digits
The number of digits entered in this option do
not print on the SMDR report. For example, if
the entry is 10, the first 10 digits a user dials do
not appear on the SMDR report.
05 Min. Digits
Outgoing calls must be at least this number of
digits for inclusion in the SMDR report.
06 Min. Call Duration
The duration of a call must be at least this
interval to be included on the SMDR report.
07 Min. Ring Time
A call must ring for at least this interval to be
included on the SMDR report.
None
35-01 : SMDR Options
Aspila EX
Item
1-8
Input Data
0- No setting
1- COM(NTCPU)
2- USB (NTCPU)
3- -- Reserve –
4- CTA/CTU
Up to 8 digit No setting
English
German
French
Italian
Spanish
0-24 (0: Not applied)
0-24 (0: Not applied)
0-65535 seconds
(0: All)
0-65535 seconds
(0: All)
Programming
Default
0
0
0
0
0
0
831