Table 24 Datalogger Specifications; Table 25 Typical Ranges And Default Setups For Single Element Transducers - Olympus 45MG User Manual

DMTA-10022-01EN, Rev. C, January 2015
Parameter
Measurement resolution
Material sound velocity range 0.508 mm/µs to 18.699 mm/µs (0.0200 in./µs to 0.7362 in./µs)
Material sound velocity
resolution
Alarm set point range
Parameter
Storage capacity
ID number length
File name length
File formats
External memory card
Table 25 Typical ranges and default setups for single element
Setup name
DEFM1-20.0-M116
DEFM1-10.0-M112
DEFM1-10.0-M1016
DEFM1-5.0-M110
DEFM1-5.0-M109
DEFM1-2.25-M106
212 Appendix A
Table 23 Measurement specifications (continued)
Selectable from the keypad:
LOW: 0.1 mm (0.01 in.)
STD: 0.01 mm (0.001 in.)
HI: 0.001 mm (0.0001 in.) with the High Resolution option.
Not all resolutions are available for all measurement modes.
0.001 mm/µs (0.0001 in./µs)
0.00 mm to 500.00 mm (0.00 in. to 20.00 in.)

Table 24 Datalogger specifications

475000 thickness readings or
20000 waveforms with thickness readings
1 to 20 characters
1 to 32 characters
Incremental
Sequential (defined by starting and ending ID number)
Sequential with custom points
2-D grid
Boiler
microSD memory card
2 GB maximum capacity
transducers
Transducer
M116 Steel: 0.250 mm to 8.000 mm (0.020 in. to 1.500 in.)
M112 Steel: 0.760 mm to 250.000 mm (0.030 in. to 10.000 in.)
M1016 Steel: 0.760 mm to 250.00 mm (0.030 in. to 10.000 in.)
M110 Steel: 1.00 mm to 380.00 mm (0.040 in. to 15.000 in.)
M109 Steel: 1.00 mm to 500.00 mm (0.050 in. to 20.000 in.)
M106 Steel: 2.00 mm to 635.00 mm (0.080 in. to 25.000 in.)
Value
Value
a
Typical measurement range