Target Group; What's New; Standard Scope - Siemens SIDOOR AT40 System Manual

1.2.2

Target group

The system manual is intended for:
• Assemblers
• Commissioning engineers
• Operators
• Service personnel
• Project engineers
1.2.3

What's new?

Revision of the system
manual
02/2018
05/2018
10/2018
08/2019
12/2020
05/2022
1.2.4

Standard scope

Description
This documentation describes the functionality of the standard scope. This scope may differ
from the scope of the functionality of the system that is actually supplied. Please refer to the
ordering documentation only for the functionality of the supplied drive system.
Further functions may be executable in the system, which are not explained in this
documentation. However, there is no entitlement to these functions in the case of a new
delivery or service.
This documentation does not contain all detailed information on all types of the product.
Furthermore, this documentation cannot take into consideration every conceivable type of
installation, operation and service/maintenance.
The machine manufacturer must document any additions or modifications they make to the
product themselves.
AT40 and ATD400V for elevators
System Manual, 06/2022, A5E42192709-AH
Change
First edition
New edition
New edition
Revision due to SIDOOR AT40 CAN ADV
New edition
• Supplement SIDOOR LINK and SIDOOR SUPPORT App
• Supplement Warnings
• Text corrections
Introduction
1.2 About this manual
9