Basic Functions (Android) - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

8.3

Basic functions (Android)

You can find the most important basic functions for the connectivity module in the dashboard
view of the "SIDRIVE IQ Config" application.
An overview of all of the basic functions is shown in the following table:
Function
Commissioning
Delete Asset (Offboard‐
ing)
Send data to Mind‐
Sphere
Replace Motor
(only for "Motor Moni‐
toring")
SIMOTICS CONNECT 400
Operating Instructions, 04/2023, A5E50161952B AL
Description
Starts the onboarding process for "SIDRIVE IQ Fleet".
The process to disconnect the connectivity module from the MindSphere application "SIDRIVE IQ
Fleet" - including deleting all data - is called offboarding.
Offboarding is the precondition for a new commissioning process (onboarding) to "SIDRIVE IQ Fleet".
Starts transfer of the measurement data from the memory of the connectivity module to "SI‐
DRIVE IQ Fleet".
Precondition: The onboarding process has already been performed.
Replacing the motor configuration without de-registering the asset from SIDRIVE IQ Fleet. You can
change the motor type, the serial number, the application, the operating point or the operating
mode. The new motor is continually monitored under the existing asset name. Data previously saved
in SIDRIVE IQ Fleet are not deleted.
Maintenance
8.3 Basic functions (Android)
135