Pull-Down Lists; Using Slide Bar Controls; Editing Text Or Numerical Values - Christie CP2000-M User Manual

Lamp OFF Icon
This icon appears on the CDP display when the lamp is OFF.
Douser Open Icon
This icon appears on the CDP display when the douser is OPEN.
Douser Closed Icon
This icon appears on the CDP display when the douser is CLOSED.

Pull-down Lists

Press to see a pull-down list of the options available for a given parameter. Use the arrow keys to scroll
ENTER
through a list of options or to adjust settings. Refer to
Values, below. Press

Using Slide Bar Controls

In some cases, the current value of a given parameter can be adjusted. Depending on the parameter, the number
displayed may have units associated with it or may be expressed as a percentage. Press the
keys on the CDP to adjust the setting up or down. Alternatively, press
value can be entered using the

Editing Text or Numerical Values

Some options allow editing of text or numerical values. When you enter 1 of these editing windows, the first
character begins flashing, indicating the option for editing. Use the
list of alphanumeric characters. The longer the arrow key is depressed the faster scrolling occurs. Use the
arrow keys to move along the text line. Spaces are included in the character selection. Incorrect
RIGHT
characters cannot be deleted, a new character must be typed over it.
CP2000-M/MR User Manual
020-100123-07 Rev. 1 (12-2009)
while in a pull-down list to cancel.
EXIT
arrow keys. After entering a value, press
/
UP DOWN
Using Slide Bar Controls
to switch to EDIT mode, where a
ENTER
arrow keys to scroll through the
/
UP DOWN
Section 3: Operation
or Editing Text or Numerical
arrow
/
LEFT RIGHT
again to accept.
ENTER
/
LEFT
3-9