Ddd-Disable Dual-Link Dvi Inputs - Christie Mirage SST Technical Reference

Command Description
CUC+H5RL <value> Sets the actual luminance value for red at point 16.
CUC+H5GL <value> Sets the actual luminance value for green at point 16.
CUC+H5BL <value> Sets the actual luminance value for blue point 16.
CUC+SLCT <0 | 1> Enables or disables 1D color uniformity.
Examples
Enable 1D color uniformity:
(CUC+SLCT 1)
Disable 1D color uniformity:
(CUC+SLCT 0)
Set the luminance value for red at point 2:
(CUC+H2RL 5322)
Set the x value for blue at point 5:
(CUC+H5BX 6798)
Set the y value for red at point 5:
(CUC+H5RY 3196)
Set the measured green values at point 5:
(CUC+H5GL 5322)
(CUC+H5GX 6798)
(CUC+H5GY 3196)
DDD–Disable Dual-Link DVI Inputs
Enables or disables the secondary DVI receiver on all Dual-Link DVI cards.
Commands
Command Description
DDD <0 | 1> Enables or disables the secondary DVI
receiver on Dual-Link DVI cards. This
command is only available if video
electronics are on. (Saved value)
Examples
Enable Dual-Link support:
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
0 = Disables 1D color uniformity
(Default)
1 = Enables 1D color uniformity
Values
0 = Enables Dual-Link support (Default)
1 = Disables Dual-Link support
25