Non-Cinema Dvi Inputs (For Alternate Content) - Christie CP4230 Service Manual

Section 9: Specifications
NOTES: 1) All formats supported at 10 bit 4:2:2 YCbCr or lower. **
supported at 12 bit 4:4:4 XYZ.
configuration they will support all the formats listed in Table 9.1 in 4:4:4 YCbCr or RGB format with 10 or 12
bits per component. Also supported is 4:2:2 YCbCr progressive input with 10 or 12 bits per component and a
pixel format of 1920 x 1080 at 47.96 or 48 fps. 3) For 3D content, the supported format is 4:2:2 YCbCr 10 bit
per eye.

9.2.2 Non-Cinema DVI Inputs (for Alternate Content)

• Number of inputs
• Standard supported
• Connector type
Table 9.3 Format for Generic Inputs to DVI-D Ports, Single-Link
NOTE: All formats listed are 4:4:4 RGB.
Source Pixel
Format
640 x 480
1280 x 720
1920 x 1080
720 x 480
1280 x 720
1920 x 1080
1440 x 480
1920 x 1080
1440 x 576
1920 x 1080
1920 x 1080
1920 x 1080
Table 9.4 Format for Generic Inputs to DVI-D Ports, Twin Link
NOTE: All formats listed are 4:4:4 RGB.
Source Pixel
Format
640 x 480
1280 x 720
1920 x 1080
1280 x 720
1920x1080
1440 x 480
1920 x 1080
1440 x 576
1920 x 1080
9-4
2) When both SMPTE 292M inputs are used together in a dual-link
Bits / Vertical
Comp Rates
8 59.94 / 60 Hz
8 59.94 / 60 Hz
8 59.94 / 60 Hz
8 59.94 / 60 Hz
8 50 Hz
8 50 Hz
8 59.94 / 60 Hz
8 59.94 / 60 Hz
8 50 Hz
8 23.98 / 24 Hz
8 25 Hz
8 29.97 / 30 Hz
Bits / Vertical
Comp Rates
10 59.94 / 60 Hz
10 59.94 / 60 Hz
10 59.94 / 60 Hz
10 50 Hz
10 50 Hz
10 59.94 / 60 Hz
10 59.94 / 60 Hz
10 50 Hz
10 50 Hz
DCI formats (SMPTE 428-9) are
2
VESA Digital Visual Interface (DVI-D)
24-pin female DVI-D
CP4230 Service Manual
020-100622-04 Rev. 1 (05-2016)