Front Flap Lock: Lubricate; Attaching The "Škoda Connect" Mirror Tag; Attaching The Škoda Connect Mirror Tag - Skoda Rapid NH 2013 Maintenance, Workshop Manual

– Check cleanliness of the support wedge surfaces, if necessary
clean these surfaces from mechanical contaminations and
corrosion.
– Check the turning of the key in the lock.
If the latch lock in the operating rosette is difficult to move or does
not move at all, it can be caused by the following:
♦ Lock broken: send it for repair to the manufacturer or replace
it with a new trailer arm
♦ Lock seizing up: clean and treat with lubricant for trailer cou‐
pling device from the ⇒ Electronic Catalogue of Original Parts .
If this does not help, replace the lock or send it for repair to the
manufacturer or replace it with a new trailer arm.
Note
When applying the lubricant for trailer coupling device from the ⇒
Electronic Catalogue of Original Parts , ensure that it penetrates
into the lock.
Check proper function of the trailer coupling device
– Insert trailer arm into the support shaft (the actuating collar
must clearly lock automatically in the operating position).
– Close lock and withdraw key.
– Inspect proper closing of the operating rosette - the operating
rosette cannot be turned.
– Check correct seating of the trailer arm though strong shaking.
– Remove trailer arm.
7.13

Front flap lock: lubricate

– Treat the lock hook of the front lid with universal oil spray
around the moving parts.
– Operate the moving parts several times so that the universal
oil is spread out.
– Remove excess lubricant with a lint-free cloth.
7.14 Attaching the "ŠKODA CONNECT" mir‐
ror tag
– Take the "ŠKODA CONNECT" mirror tag from the vehicle log
book set.
Note
The "ŠKODA CONNECT" mirror tag is either with the vehicle log
book pouch or one of the brochures.
Rapid NH 2013 ➤ , Rapid NH 2014 ➤
Maintenance - Edition 06.2018
177
7. Body