Removing And Installing Drive Plate - Skoda Octavia Workshop Manual

OCTAVIA
Edition 04.03
S00.5127.54.20
Crank Assembly

Removing and installing drive plate

Special tools, testers and aids required
♦ Torque wrench
♦ Counterholder MP 1-221
♦ Depth gauge
Slackening and tightening drive plate
K - Attach counterholder MP 1-221 with hexa-
gon screw M8x45 to the drive plate. Insert
two M10 hexagon nuts between the counter-
holder and the drive plate.
Fitting location of counterholder:
♦ A - for slackening
♦ B - for tightening
Installing drive plate
K - Insert the drive plate using the washer with
recesses -2-.
- Insert at least 3 new bolts -3-
and tighten to 30 Nm.
13
------------ 13-21 -------------