Receiver Mode - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
5. UBEX Concept 5. UBEX Concept
5.1.2. Receiver Mode
Port Diagram
The port diagram is valid for the following UBEX endpoint models:
▪ UBEX-PRO20-HDMI-F100
▪ UBEX-PRO20-HDMI-F110
▪ UBEX-PRO20-HDMI-R100 series
Video port diagram of the F100/F110/R100 receiver
Fiber Optical Interface
The receiver can receive two HDMI video streams via the SFP+ / fiber optical input ports (SFP+ Link 1 and 2).
HDMI Output Modes
The receiver can transmit HDMI video streams on two HDMI 2.0 output ports. The signal can be up to 4K@60
Hz 4:4:4 in the case of both outputs. The streams received from the remote endpoint device can be routed
to any HDMI outputs of receiver, e.g. the stream from the TX - HDMI in 1 can be switched to the RX - HDMI
out 1 or 2, or both ones either.
The streams can be processed by the video processors. The processor of the HDMI out 1 has video scaler,
frame rate converter (FRC), and color space converter (CSC) functions. The processor of the HDMI out 2 has frame
rate converter and color space converter functions.
The scaler settings are available in the LCD menu (see the details in the
LDC software (see the details in the Scaler Panel - Output Side (RX/TRX Modes)
converter settings (FRC) are available in the LCD menu (see the details in the
the LDC software (see the details in the
Stream Output section) and in the
section); the frame rate
Stream Output
FRC - Output Side (RX Mode) section).
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
Source Multiplexer (MUX)
The source multiplexer (Source MUX) makes available routing more different source signals to the HDMI
output ports. The type of sources is different for the two outputs.
HDMI out 1
▪ Able to accept signal up to 4K@60 4:4:4 resolution via the SFP+ links from the remote endpoint device;
▪ Able to accept signal up to 4K@60 4:4:4 resolution via the local HDMI in 1 port.
HDMI out 2
Able to accept signal up to 4K@60 4:4:4 resolution via the SFP+ links from the remote endpoint device;
▪
▪ Able to accept signal up to 4K@60 4:4:4 resolution via the local HDMI in 2 port;
▪ Able to copy the signal of the HDMI out 1 port up to 4K@60 4:4:4 resolution. This is the COPY function.
HDMI Input Modes
The HDMI input ports of the receiver operate as local HDMI inputs. The stream cannot be affected by any
video processing.
Summary Tables
Accepted signal
Signal sink
Output signal
Signal source
Scaler
Frame rate converter (FRC)
Color space converter (CSC)
section) and in
HDMI INPUTS
HDMI input 1 HDMI input 2
up to 4K@60 4:4:4 up to 4K@60 4:4:4
HDMI out 1 HDMI out 2
HDMI OUTPUTS
HDMI output 1 HDMI output 2
up to 4K@60 4:4:4 up to 4K@60 4:4:4
Selected input port of the Selected input port of the
remote device remote device
Local HDMI in 2
Local HDMI in 1
Copy of the HDMI out 1
 
-
   
   
53 53