Setting Input Timing - IDK MSD-702UHD User Manual

MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
9.7

Setting input timing

You can set the timing parameters for analog signal inputs.
The MSD loads the optimal table from its embedded library of tables and adjusts the input timing
automatically, you typically will not need to change settings in this menu. However, if signals which are not
registered in the MSD tables are input or if part of the video image is cut off while relying on the standard table
registered in the MSD, you may optimize the input timing parameters manually.
For digital inputs, you typically do not need to manually set timing parameters, but if part of the video image is
cut off, you may make fine adjustments as required.
Automatic measurement
The total number of horizontal dots
Start position
Active area
Automatic measurement of start
position
Automatic setting of input timing
Loading device data
Registering device data
Tracking
Partly 1: can be set only if analog RGB / analog YPbPr signals are input.
Partly 2: only displayed if analog video signals are input or for digital input.
Partly 3: can be set only if the device data of input signals are registered in the MSD.
62
[Table 9.4] Settable items
Function
Analog input Digital input
Partly 1 Cannot be set
Partly 1, Partly 2
Can be set Can be set
Can be set Can be set
Can be set Cannot be set
Can be set Cannot be set
Partly 3 Can be set
Partly 1 Cannot be set
Partly 1 Cannot be set
Partly 2